Portable Single Phase Reference Standard Meter MCSP01

LCD display.

Accuracy class: 0.2  (clamp mode).

Measuring range: 120V-420V.

Power and Energy test, Error test, Dial test.

Inbuilt 2000mAh lithium battery supporting 8 hours continuous working.

Support RS232 communication with PC to upload the test data.


Features

Technical Index

Used in lab or site.

Test all kinds of electronics/electromechanical single phase meter at site.

Test and display basic error, voltage, current, power, power factor, energy, harmonics, etc.

Measure and Display waveform, vector diagram and distortion degree.

Harmonic test up to 64 times and histogram display.

Dial test /CT ratio Test.

Alpha numeric keyboard.

Optical sensor with clamp or attaching disc to hold & count LED/LCD signal pulse.

Snap switch to be used as an alternative of scanner/sensor head.

Clamp-on CT with electronic compensation.

LCD display.

High Resolution Display.

Two kinds of operation modes (auto & manual).

Alarm protection with display and beep sound alarm when measured current beyond range.

Pulse input interface with over voltage protection and no damage of device if wrongly connect 220V.

Real time internal clock with non-rechargeable battery with at least 10 years life.

Store more than 1000 test results, and can inquiry saved data, also support external USB storage.

Interface to connect external printer (optional).

Support the firmware upgrade by USB.

PC management software of uploaded the test records and get test report.

Compliance with relevant IEC standard.

Accessories: scanning head sensor, clamps, test cables, communication cable, pulse cable, power cord..etc.


  • Previous:
  • Next:

  • Current measurement
    Accuracy class  0.2 (active energy)
    Range of clamp on CT  5A, 10A, 20A, 100A, 500A, 1000A (based on client requirements)
    Voltage measurement
    Range  120V-420V
    Accuracy 0.2
    Frequency Measurement
    Range  45-65HZ
    Error  ≤ 0.05HZ
    Phase angle measurement
    Range  0-360 deg.
    Error  ≤0.05 deg.
    Input impedance  ≥300KΩ(Voltage); ≤0.01Ω(Current)
    Output standard energy impulse (400V, 5A)
    FL=3.6×103/(Current Range/5)p/kWh;FH= FL×103;  
    Power supply voltage range  120V-420V
    In-built 2000mAh lithium battery can support 8hours continuous working
    (with energy saving function  long time for no operation and no test signal, the device will automatic power off)
    Dimension/weight  270mm*210mm*150mm/4.5kgs
  • Write your message here and send it to us