Multi function Partial Discharger Tester MCPD004

7”LCD display, touch screen, ARM processor and inbuilt operation system, friendly HMI.

Can be operated by android system terminal,Adopting android system and providing special-use test software.

Partial discharge test and location of GIS, Switchgear, Cable tray, cable joint, insulators & LBS on transmission line, transformer, cables and etc.

Test result can show discharge strength, discharge phase, history data, etc.


Features

Technical Index


  • Previous:
  • Next:

  • TEV measurement

    Item Specification
    Sensor  capacitance type
    Range  0-60bBmV
    Frequency range 3-100MHz
    Resolution 1dB
    Accuracy ±1dB
    Maximum impulse/cycles qty 1400

     

    Ultrasonic Measurement

    Item Specification
    Range  -7dBuV~68dBuV
    Resolution 1dB
    Accuracy ±1dB
    Sensor sensitivity -65dB (0dB=1V/ubar RMS SPL)
    Sensor center frequency 40kHz
    Frequency range 20~100kHz
    Sensor diameter 16mm
    Heterodyne frequency 38.4kHz

    AE contact-type ultrasonic measurement

    Item Specification
    Range 0dBuV~68dBuV(0.001mv~1.000mv)
    Resolution 1dB
    Accuracy ±1dB
    Sensor sensitivity -65 dB (0 dB=1 volt/μbar RMS SPL)
    Frequency range 0~200 kHz

    HFCT high frequency DC measurement

    Item Specification
    Sensor type HFCT
    Range 0pC~25000pC
    Sensitivity not more than 50pC
    Test frequency 200KHz~50MHz
    Test band width 100 MHz
    Inner diameter 45mm
    Outer diameter 110 mm
    Output impedance 50Ω
    Output interface BNC connector

    UHF ultra high frequency measurement

    Item Specification
    Sensor type UHF
    Range - 65dBm ~0dBm/-10~60 dBm
    Sensitivity >10mm
    Resolution ±0.5dB
    Frequency response 300MHz~1500MHz
    Output impedance 50Ω
    Output interface BNC connector
    Size & Weight  235mm*145mm*46mm / 1.5KGS 
    Rated input supply for charger 90-264V AC/ 47-63HZ, charging voltage 12V DC 
  • Write your message here and send it to us

    related products