Electricity Meter Testing
-
Single Phase Portable Meter Test System MCCS1.1
Small size and weight.
Used in lab or worksite.
LCD display.
Accuracy class: 0.1 (direct mode); 0.2 (clamp mode).
Measuring range: upto 300V /100A (direct mode).
Power and Energy test, Demand test, Error test, Dial test, Start, Creep test.
Support RS232 communication with PC to upload the test data.
-
Portable Three Phase Meter Test Equipment UTI-SR01
In-built Standard Reference Meter (SRM): accuracy class 0.05.
Error test, start test, creep test, dial test..etc.
Measurement of volts, current, p.f., power, frequency, phase angle, harmonic..etc.
Power Source (PS): output 0-360V/phase & 1mA-120A/phase, or depend on client requirement
Linear amplifier.
Can be independent set & output of each phase voltage & current.
Can set phase angle independently.
Meter Rack: three positions are optional.
Automatic control by PC software.
Manual control by touch screen/keypad.
-
Portable Three Phase Meter Test System MCPTS3.0
Error test, start test, creep test, dial test, CT ratio error test, CT/PT burden test.
Can be independent set & output of each phase voltage & current.
Can set phase angle independently.
External connect with thermal printer (optional).
Can operate by PC software.
Manual control by touch screen/keypad.
-
Portable Three Phase Power Source UTI
Can be externally controlled by computer through RS232 setting the parameters on computer and then test by control software; can be used independently also can be used together with reference standard meter.
Also can be operate by the keyboard on the faceplate
With LED indicator on the face plate after power on the unit
With voltage measurement facility and loop back control.
With measurement mode selection, namely 3P3W, 3P4W and 1P2W. When select 3P3W, automatically deactivate L2 phase current and when select 1P2W, automatically deselect L2 and L3 phases.
With overload, short circuit and thermal overload protection.
When accuracy of the unit changes, can calibrate it by given method by yourself.
With package avoiding damage and disturbance.
Single phase power supply, range 85-282V, 47 to 63Hz.
Working conditions: -10℃ to 50℃， 10%-95% R.humidity.
-
Portable Single Phase Reference Standard Meter MCSP01
LCD display.
Accuracy class: 0.2 (clamp mode).
Measuring range: 120V-420V.
Power and Energy test, Error test, Dial test.
Inbuilt 2000mAh lithium battery supporting 8 hours continuous working.
Support RS232 communication with PC to upload the test data.
-
Portable Three Phase Reference Standard Meter MCST01 series
LCD display
Tablet operation by android software (optional)
Accuracy class: 0.1 or 0.05 or 0.02 (optional)
Direct mode/Clamp mode
Measuring range: 3*(1V-576V)/3*(1mA-12A)
Power and Energy test, Demand test, CT burden & Ratio Test, PT load test, Dial test
Support RS232/USB communication with PC to upload the test data
-
Portable Three Phase Reference Standard Meter MCST01C
Used in lab or worksite.
LCD display.
Tablet operation by android software (optional).
Accuracy class: 0.1 or 0.05 or 0.02 (optional).
Direct mode/Clamp mode.
Measuring range: 3*(1V-576V)/3*(1mA-120A).
Power and Energy test, Demand test, CT burden & Ratio Test, PT load test, Dial test.
Support RS232/USB communication with PC to upload the test data.
-
Portable Three Phase Reference Standard Meter MCSB03B
Small size and weight.
Used in lab or worksite.
Work as standard meter and calibrator in worksite or lab.
LCD display.
Accuracy class: 0.05 or 0.02 (optional).
Measuring range: 3*(1V-576V)/3*(1mA-120A).
Power and Energy test, Demand test, CT burden & Ratio Test, PT load test, Dial test.
Optional for DC measurement for transducer test.
-
Portable Three Phase Meter Test System MCPTS4.0
1.Error test, start test, creep test, dial test, CT ratio error test, CT phase angle error test, CT/PT burden test
2.Can be independent set & output of each phase voltage & current
3.Can be independently used as portable reference meter
4.External connect with thermal printer (optional)
5.Can operate by PC software
6.Manual control by touch screen/keypad
-
Single Phase Meter Test Bench
1. Error test, start test, creep test, standard deviation test..etc
2. Measurement of volts, current, p.f., power, frequency, phase angle, harmonic..etc..
3. Power Source (PS): output 0-288V/1mA-120A, or depend on client requirement
4. Standard Reference Meter (SRM): accuracy class (0.02, 0.05 or 0.1) is optional
5. Meter Rack: positions (6, 10, 12, 20, 24, 30, 48…) are optional
6. Automatic control by PC software
7. Manual control by touch screen
8. Optional for dual current channel test (Phase/Neutral) at same time/separately
-
Portable Three Phase Meter Test System MCPTS4.0
1.Error test, start test, creep test, dial test, CT ratio error test, CT phase angle error test, CT/PT burden test
2.Can be independent set & output of each phase voltage & current
3.Can be independently used as portable reference meter
4.External connect with thermal printer (optional)
5.Can operate by PC software
6.Manual control by touch screen/keypad
-
Three Phase Meter Test Bench
1. Error test, start test, creep test, standard deviation test..etc
2. Measurement of volts, current, p.f., power, frequency, phase angle, harmonic..etc..
3. Power Source (PS): output 0-360V/phase & 1mA-120A/phase, or depend on client requirement
4. Standard Reference Meter (SRM): accuracy class (0.02, 0.05 or 0.1) is optional
5. Can be independent set & output of each phase voltage & current
6. Can set phase angle independently
7. Meter Rack: positions (3, 6, 10, 12, 20, 24,40..) are optional
8. Automatic control by PC software
9. Manual control by touch screen